HOW TO MAKE A KOI POND



Unlike the koiam to cultivate food fish, koi pond in the garden, do not need to measure elevation. Koi pond can be made entirely below ground, above the ground surface, or a combination. Unlike the consumption of fish ponds should be combined. There are times when we need to create a koi pond, all located on the ground, because of its location next to the usual home for passersby person. Swimming like this would be a quick dirty If entirely below ground level, then we take the form of a me-prominent. Sometime people might want to build a large enough pool to the garden area that is so, it would seem less attractive when the pool is too prominent so that it covers the beauty of other parts of the park. In this case, all located in the pool below the soil surface is preferred. And not infrequently they want deeper pools in the corner of the yard (garden), so that they harbored most of his pool in the soil and partly protruding from the ground. Various options must be determined after looking at the situation and conditions in its entirety.

After determining the desired shape, the pool can be designed on top of the soil with a plastic rope or water hose so that it would easily visible formations. Then the land can begin to dig with a hoe. If you want a pond with the arrival of two pages, the outside of the center over the shallow side, should be planned from the beginning to not bother working on the pool. Pool with two depths is very useful for koi, especially for those hiding from the scorching heat too.

Raw material should be an in-use brick. With its small bricks can be made very flexible according to our will. Unlike the large brick that make it difficult to If you want squiggly shape. At the bottom of the pool can be installed brick or casted. However, before it all should be determined from the outset where the door discharges and water intake. Disposal door for an entirely built in the ground, it may not be made. For the entire pool water circulation should be considered. It means that if we want the watery plunge pool or fountain areas have to think about where the pump, filter water, and part of which will be made ter-juannya. Therefore, once again very important for us to pour wishful thinking and desires us to the image detail. Lest we still have to overhaul when the building is completed. When the building is neat and we forget to make a hole then it will certainly add to the work, because we also have to create a channel associated with that hole.

Do pond surface should be made smooth as we made ​​it home, because it will be difficult for moss to grow. With cement lining (mengaci) rather rough, we hope it will be a slippery pool and comfortable for the fish because of the existing moss layer on its surface. Work on the top of the pool does not always have to be completed with a brick as well, but can be used rocks that have an artistic form and (if possible) antique. Because the pool may not be present alone in the park, also provide room for a place to plant crops. In the background is more suitable for a pond because plants do not block the view.  

0 comments :

Post a Comment

Powered by Blogger.